Telescopic bollard systems are specially produced. Telescopic bollard systems are especially suitable for areas where there is a risk and infrastructure problem.
Telescopic bollard are preferred in military installations, security units and lodgings, consulates and public buildings, all of which require high security precautions but with infrastructure problems.
As in bollard systems, telescopic bollard systems have also been strengthened to prevent unauthorized vehicle entry.
Diameter Ø 219 - 273 - 300 - 323 mm
Excavation depth 450 - 650 - 800 - 1000 mm
Length 500 - 700 - 900 - 1100 mm
Wall Thickness 16 - 20 - 30 mm
Moving Part 304-316 Stainless
Mortise and Tenon Joinery Hot-dip Galvanized
Connection Points M8 x 30 İmbus Bolt (Stainless)
Operating Speed 5-6 sec.
Control Panel A-GA Board
System Security Support Loop Sensor
Min. Operating Pressure 40 bar / 580 psi
Max. Operating Pressure 60 bar / 870 psi
Hydraulic Hose R2 3/8 330 Bar
Hydraulic Oil 32/46/68
Unit Operating Voltage 220/380 V ( AC)
Operating Temperature -25 °C / +50 °C
Manually Ball Valve
Can be connected to any kind of Access control system License Plate Recognition, Card Reader,etc.
Manual Lifting Manual Lifting
Power Outage Accumulator Support
System Security Support Safety Photocell
Warning Equipment Flasher / Traffic Lamp
Control Panel PLC (Programmable Logic Controller)
E.F.O. Circuit For Emergency Lifting Yes 2 sec.
Hydraulic System Heating- Cooling
Water Drain Pump
Protection Class IP67
Product Certificates CE, Turkish Goods Certificate
Quality Certificates ISO (20000-1:2011, 9001:2015,10002:2018, 14001:2015), OHSAS (18001:2007)